Tiffany Deco radiator: a decorative ornate cast iron radiator which combines the elegance of a bygone era with high efficiency. It is suitable for period homes, living rooms, dining rooms and bedrooms. We offer this designer radiator in a central heating version, in two or three column versions and 40 colours.

Prices & Sizes

blue radiators, classic cast iron radiators, coloured cast iron radiators

Prices & Sizes

DESCRIPTION

Benefits of this designer radiator:
- classic and ornate style
- traditional design - modern heating device
- central heating radiator with good heat outputs
- available in two and three column versions
- coloured radiator (40 colours)
- similar model: Tiffany Light radiator model

Please note that the cast iron radiators are manufactured from crude iron according to a nearly 100-year-old technology , by using original moulds.
Their surface might be uneven and coarse; the joints do not always fit precisely. Although such differences may not seem like very refined workmanship, these features add to the authentic and antique appearance of these radiators.
Cast iron radiators are heavy and hard to move. This needs to be taken into consideration as delivery can be carried out exclusively up to a street gate or entrance accessible by lorry.

MATERIAL(S) of this radiator: cast iron
WARRANTY: 3 years
DELIVERY SCHEDULE: approx. 8-9 weeks

TECHNICAL SPECIFICATIONS

Sizes of the Tiffany Deco cast iron radiator:
Heights: 660mm high, 955mm high
Widths (vent valves: plus 15mm!): 410mm wide, 486mm wide, 562mm wide, 638mm wide, 714mm wide, 790mm wide
Version: 2 columns
and
Heights: 750mm high, 950mm high
Widths (vent valves: plus 15mm!): 420mm wide, 498mm wide, 576mm wide, 654mm wide, 732mm wide, 810mm wide
Version: 3 columns

Technical specifications:
Heat outputs: All heat outputs are shown at operating temperatures of 75/65/20 (Δt50°C). All radiators have been manufactured and tested in accordance with DIN EN 442.
Valves: These radiators are not supplied with valves.
Available connections:
A) 4 x 1/2" BSP connections.- Centre-to-centre distance of connections: nominal height- 160 mm, (two column version) and nominal height-168 mm (three column version)
B) 2 x 1/2" BSP bottom opposite ends (BOE) connections - Centre-to-centre distance of connections: nominal width + valves
Maximum operating pressure: 4 bar
Maximum water temperature: 90°C
Air vent: All cast iron radiators are supplied with air vent valves.
Finish: High quality, environmentally friendly, double electrostatic powder coating (burned Epoxy-Polyester coating for RAL colours) according to DIN 55900.

See the technical drawing(s) HERE

SAFETY NOTICE

SAFETY NOTICE

In order to avoid accidents keep to the following safety regulations:

INSTALLATION AND MAINTENANCE OF RADIATORS
• All radiators must be installed and maintained by a certified professional, who provides legal guarantee for the work done.
• The radiators must be installed exclusively by certified fittings provided by the manufacturer.
• The radiator must be fixed soundly to the wall; as radiators are very heavy, torn out of the wall they can do extensive damage and seriously injure people nearby.
• Radiators can be fixed to walls that can carry their weight. Too thin and drywall walls must be reinforced by a professional before installation.
• Use the radiators strictly according to their purpose.
• Radiator holders are designed to safely carry the weight of the radiator; for this reason never put any extra weight on it, cling to it or lean, sit or stand on it even for a second.
• The radiator should not be placed behind or below furniture or other obstacle for the circulation of air.
• The radiator can be damaged by mechanical force caused by hard objects, so avoid this by all means.
• If you notice any damage, fracture, etc. on the radiator, switch it off immediately or turn off the heating. In the case of electric and dual fuel radiators disconnect the device from electricity.

HOT WATER RADIATORS
• Faulty or damaged radiators can leak hot water, which might cause serious burn injuries. In case you cannot wait until it cools down touch the hot radiator with utmost care.

ELECTRIC AND DUAL FUEL RADIATORS
• Electric and dual fuel radiators must be handled with the same level of caution and safety measures as any other electrical household appliances.
• Keep the electrical cord intact. Cords must not get in contact with the hot radiator.
• Electric/dual fuel radiators in rooms with running water can be installed only in areas determined by the IP Code provided with each electric/dual fuel radiator. The IP zones drawing can also be found with these models. (The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.)

GLASS AND MIRROR RADIATORS
• Although tempered glass, used for glass and mirror radiators, is many times stronger than float glass and complies with the EU standards, it is apparently not unbreakable, consequently it needs caution (despite the fact that, when broken, it usually will break into small fragments, which are less likely to cause serious injury.).
• Do not let any mechanical force caused by hard and sharp objects damage the surface of the glass/mirror.

CHILD SAFETY
• Unless the heating temperature is set low make sure that children are supervised near the radiator. As the body surface of a child is bigger than that of an adult, and their skin is considerably thinner, a hot radiator or hot water leaking from a damaged radiator can do more serious burn injuries to them.
• Some radiator models have sharp edges, which can also cause injuries to children. For this reason, if you live with children, or have children around unsupervised, install only radiators with rounded edges.
• Keep children away from the cord of the electric/dual fuel radiator. The best solution is wires hidden in the wall or the use of cord cover.

Ask a question about this product

SELECT HEATING TYPE, ACCESSORIES, SIZE AND HEAT OUTPUT

TYPE/ACCESSORY

HEIGHT

WIDTH

DEPTH

OUTPUT (W)

Clear & Re-selection

RESULT

Type & Size selection:

Colour selection:

Base price with tax £0

Total (incl. VAT): £0

Sales price £0

Total discount:

Each radiator is manufactured individually for you!

Back to: Bedroom radiators

Radiators for Bedrooms

Why Choose Our Bedroom Radiators?

A bedroom radiator is background hardware. It isn’t a feature piece, but something that should do its job without drawing attention. Every unit is built to order, so the dimensions and pipework connections are specified to fit the room, rather than you having to adapt the space to the radiator. It means no awkward pipe runs and no need to settle for a position that doesn’t quite work.

The range is designed for typical British housing layouts. We provide vertical panels for the narrow wall beside a wardrobe and horizontal units for the space under a sash window. We also have column radiators for period rooms where something more substantial looks right. Heat output is matched to your room size, so the radiator maintains a steady temperature without having to run flat out.

Over 200 RAL colours are available as standard, with no surcharge. Most people choose a finish that blends in—a white that matches the wall or an anthracite that sits with dark furniture. Others prefer a contrast. Either way, the colour is included in the price. All units carry a five-year guarantee, and mainland UK delivery is included on all orders.

Background hardware, built to fit. Nothing more, nothing less.

Radiators by Category

Radiators by Material/Finish

Radiator Ideas

Special Radiators

Radiators at a glance

Informations

Tiffany Deco radiator