BENEFITS OF THIS RADIATOR
Benefits of this cast iron radiator:
- classic ornate radiator
- polishing of the radiator is done by hand
- excellent heating efficiency
- available from 5 to 20 sections
- suitable for central heating
- available accesories: manual valves, thermostatic valves
- also available in an electric version (see the Lille Electric radiator)
Please note that the cast iron radiators are manufactured from crude iron according to a nearly 100-year-old technology , by using original moulds.
Their surface might be uneven and coarse; the joints do not always fit precisely. Although such differences may not seem like very refined workmanship, these features add to the authentic and antique appearance of these radiators.
Cast iron radiators are heavy and hard to move. This needs to be taken into consideration as delivery can be carried out exclusively up to a street gate or entrance accessible by lorry.
MATERIAL(S) of this design radiator: cast iron
WARRANTY: 5 years
DELIVERY SCHEDULE: approx. 6 weeks
TECHNICAL SPECIFICATIONS
Sizes of this cast iron radiator:
Height (with legs): 590mm high
Widths (vent valve: plus 15mm!): 335mm wide (4 sections), 392mm wide (5 sections), 464mm wide (6 sections), 535mm wide (7 sections), 607mm wide (8 sections), 678mm wide (9 sections), 750mm wide (10 sections), 822mm wide (11 sections), 893mm wide (12 sections), 965mm wide (13 sections), 1036mm wide (14 sections), 1108mm wide (15 sections), 1180mm wide (16 sections), 1251mm wide (17 sections), 1323mm wide (18 sections), 1394mm wide (19 sections), 1466mm wide (20 sections)
Height (with legs): 790mm high
Widths (vent valve: plus 15mm!): 318mm wide (4 sections), 389mm wide (5 sections), 460mm wide (6 sections), 531mm wide (7 sections), 602mm wide (8 sections), 673mm wide (9 sections), 744mm wide (10 sections), 815mm wide (11 sections), 886mm wide (12 sections), 957mm wide (13 sections), 1028mm wide (14 sections), 1099mm wide (15 sections)
Technical specifications:
Heat outputs: All heat outputs are shown at operating temperatures of 75/65/20 (Δt50°C). All radiators have been manufactured and tested in accordance with DIN EN 442.
Valves: These cast iron radiators are not supplied with valves.
Available connections:
A) 4 x 1/2" BSP side connections - Centre-to-centre distance of connections: 400mm (590mm high model), 600mm (790mm high model)
B) 2 x 1/2" BSP bottom opposite ends (BOE) connections - Centre-to-centre distance of connections: nominal width + valves
Distance between the floor and the bottom connection: 110mm
Maximum operating pressure: 2,5 bar
Maximum water temperature: 95°C
Air Vent: All radiators are supplied with air vent valves.
Finish: hand polishing
See the technical drawing(s) HERE
COLOURS
hand polished cast iron
SAFETY NOTICE
SAFETY NOTICE
In order to avoid accidents keep to the following safety regulations:
INSTALLATION AND MAINTENANCE OF RADIATORS
• All radiators must be installed and maintained by a certified professional, who provides legal guarantee for the work done.
• The radiators must be installed exclusively by certified fittings provided by the manufacturer.
• The radiator must be fixed soundly to the wall; as radiators are very heavy, torn out of the wall they can do extensive damage and seriously injure people nearby.
• Radiators can be fixed to walls that can carry their weight. Too thin and drywall walls must be reinforced by a professional before installation.
• Use the radiators strictly according to their purpose.
• Radiator holders are designed to safely carry the weight of the radiator; for this reason never put any extra weight on it, cling to it or lean, sit or stand on it even for a second.
• The radiator should not be placed behind or below furniture or other obstacle for the circulation of air.
• The radiator can be damaged by mechanical force caused by hard objects, so avoid this by all means.
• If you notice any damage, fracture, etc. on the radiator, switch it off immediately or turn off the heating. In the case of electric and dual fuel radiators disconnect the device from electricity.
HOT WATER RADIATORS
• Faulty or damaged radiators can leak hot water, which might cause serious burn injuries. In case you cannot wait until it cools down touch the hot radiator with utmost care.
ELECTRIC AND DUAL FUEL RADIATORS
• Electric and dual fuel radiators must be handled with the same level of caution and safety measures as any other electrical household appliances.
• Keep the electrical cord intact. Cords must not get in contact with the hot radiator.
• Electric/dual fuel radiators in rooms with running water can be installed only in areas determined by the IP Code provided with each electric/dual fuel radiator. The IP zones drawing can also be found with these models. (The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.)
GLASS AND MIRROR RADIATORS
• Although tempered glass, used for glass and mirror radiators, is many times stronger than float glass and complies with the EU standards, it is apparently not unbreakable, consequently it needs caution (despite the fact that, when broken, it usually will break into small fragments, which are less likely to cause serious injury.).
• Do not let any mechanical force caused by hard and sharp objects damage the surface of the glass/mirror.
CHILD SAFETY
• Unless the heating temperature is set low make sure that children are supervised near the radiator. As the body surface of a child is bigger than that of an adult, and their skin is considerably thinner, a hot radiator or hot water leaking from a damaged radiator can do more serious burn injuries to them.
• Some radiator models have sharp edges, which can also cause injuries to children. For this reason, if you live with children, or have children around unsupervised, install only radiators with rounded edges.
• Keep children away from the cord of the electric/dual fuel radiator. The best solution is wires hidden in the wall or the use of cord cover.
