TECHNICAL SPECIFICATIONS

Sizes of the Miss designer radiator:
Heights: 292mm high, 392mm high, 492mm high, 592mm high, 680mm high, 742mm high, 870mm high, 892mm high, 992mm high, 1492mm high, 1792mm high, 1992mm high, 2192mm high, 2492mm high
Widths (vent valves: plus 15mm!): 155mm wide, 200mm wide, 245mm wide, 290mm wide, 335mm wide, 380mm wide, 425mm wide, 470mm wide, 515mm wide, 560mm wide, 605mm wide, 650mm wide, 695mm wide, 740mm wide, 785mm wide, 830mm wide, 875mm wide, 920mm wide, 965mm wide, 1010mm wide, 1055mm wide, 1100mm wide, 1145mm wide, 1190mm wide, 1235mm wide, 1280mm wide, 1325mm wide, 1370mm wide, 1415mm wide, 1460mm wide, 1505mm wide, 1550mm wide, 1595mm wide, 1640mm wide, 1685mm wide, 1730mm wide, 1775mm wide, 1820mm wide
Versions: 2 columns (66mm deep), 3 columns (107mm deep), 4 columns (148mm deep), 5 columns (189mm deep) and 6 columns (230mm deep)

Technical specifications:
Heat outputs: All heat outputs are shown at operating temperatures of 75/65/20 (Δt50°C). All radiators have been manufactured and tested in accordance with DIN EN 442.
Valves: These column radiators are not supplied with valves.
Available connections:
A) 4 x 1/2" BSP side connections - Centre-to-centre distance of connections: nominal height -57mm
B) 2 x 1/2" BSP bottom-side (BOE) connections - Centre-to-centre distance of connections: nominal width + valves
Maximum operating pressure: 10 bar
Maximum water temperature: 95°C
Air vent: These column radiators are supplied with air vent valves.
Brackets: All radiators are supplied with brackets.
Finish: High quality, environmentally friendly, double electrostatic powder coating according to DIN 55900.

See the technical drawing(s) HERE

COLOURS

Please note the colours depicted on the chart below and the ones displayed beside the models are for guidance only. The displayed colour will depend on your monitor and browser, so colours cannot be shown perfectly. For this reason you may find differences between hue and shade on your screen and the radiator manufactured for you.

See the available colours HERE (in JPG format) and HERE (in PDF format)

3D MODEL

The 3D model of this radiator for architectural, interior & room visualization is downloadable here: ZIP FILE
If you have any problems regarding the downloading of the 3D Model zip file, please do not hesitate to contact us: [This email address is being protected from spambots. You need JavaScript enabled to view it.]

SAFETY NOTICE

SAFETY NOTICE

In order to avoid accidents keep to the following safety regulations:

INSTALLATION AND MAINTENANCE OF RADIATORS
• All radiators must be installed and maintained by a certified professional, who provides legal guarantee for the work done.
• The radiators must be installed exclusively by certified fittings provided by the manufacturer.
• The radiator must be fixed soundly to the wall; as radiators are very heavy, torn out of the wall they can do extensive damage and seriously injure people nearby.
• Radiators can be fixed to walls that can carry their weight. Too thin and drywall walls must be reinforced by a professional before installation.
• Use the radiators strictly according to their purpose.
• Radiator holders are designed to safely carry the weight of the radiator; for this reason never put any extra weight on it, cling to it or lean, sit or stand on it even for a second.
• The radiator should not be placed behind or below furniture or other obstacle for the circulation of air.
• The radiator can be damaged by mechanical force caused by hard objects, so avoid this by all means.
• If you notice any damage, fracture, etc. on the radiator, switch it off immediately or turn off the heating. In the case of electric and dual fuel radiators disconnect the device from electricity.

HOT WATER RADIATORS
• Faulty or damaged radiators can leak hot water, which might cause serious burn injuries. In case you cannot wait until it cools down touch the hot radiator with utmost care.

ELECTRIC AND DUAL FUEL RADIATORS
• Electric and dual fuel radiators must be handled with the same level of caution and safety measures as any other electrical household appliances.
• Keep the electrical cord intact. Cords must not get in contact with the hot radiator.
• Electric/dual fuel radiators in rooms with running water can be installed only in areas determined by the IP Code provided with each electric/dual fuel radiator. The IP zones drawing can also be found with these models. (The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.)

GLASS AND MIRROR RADIATORS
• Although tempered glass, used for glass and mirror radiators, is many times stronger than float glass and complies with the EU standards, it is apparently not unbreakable, consequently it needs caution (despite the fact that, when broken, it usually will break into small fragments, which are less likely to cause serious injury.).
• Do not let any mechanical force caused by hard and sharp objects damage the surface of the glass/mirror.

CHILD SAFETY
• Unless the heating temperature is set low make sure that children are supervised near the radiator. As the body surface of a child is bigger than that of an adult, and their skin is considerably thinner, a hot radiator or hot water leaking from a damaged radiator can do more serious burn injuries to them.
• Some radiator models have sharp edges, which can also cause injuries to children. For this reason, if you live with children, or have children around unsupervised, install only radiators with rounded edges.
• Keep children away from the cord of the electric/dual fuel radiator. The best solution is wires hidden in the wall or the use of cord cover.

To open the safety notice in PDF click HERE